Kenwood DPX501 Instruction Manual - Page 23

• When you selected the Display Type B display, select an easy viewable font color. • The "Status" item of Display type C/D can be set; however, the actual display color does not change. Function of the DPX701 Display Type E G-Analyzer display Switching Alternates G-Analyzer display when the Display type is set to Display Type E. (G: gravity) • Before alternating G-Analyzer display, you are required to setup (page 39), (page 40) and (page 40). 1 Select the display mode Press the [DISP] button. Select the Display Type E. 2 Enter G-Analyzer display select mode Press the [DISP] button for at least 1 second. 3 Select the G-Analyzer display Push the Control knob towards [4] or [¢]. G-Force Sensor display G- Graphic display • G-Graphic display Displays the condition of G in horizontal direction (e.g; when turning the curve) by the graphic. • G-Meter display (Graphic) Displays the maximum value of acceleration G, right direction G, and left direction G by the numerical value. • G-Meter display (Text) The maximum value of acceleration G, right direction G, and left direction G is displayed by the numerical value. The value of G is only the reference, so is different from the actual value. • G-Counter display Adds the point of the acceleration level. The point is determined after a lapse of 1 hr drive or at power off (ACC Off ), and then it will be displayed by the graph. Furthermore, the G-Counter displays the average of the past data by the line. (The scale of graph is determined along with the largest point among the past 10 data.) • The value of G-Meter display and G-Counter display can be reset by (page 40). 4 Exit G-Analyzer display select mode Press the [DISP] button. G-Meter display (Graphic) G-Meter display (Text) Point G-Counter display Time English | 23