Kenwood DPX501 Instruction Manual - Page 43

Function of the DPX701 Other than Standby mode B.M.S. Frequency Offset Setting the central frequency, boosted by B.M.S. Display "AMP FREQ : Normal" "AMP FREQ : Low" Setting Boost with the normal central frequency. Drop the normal central frequency 20%. Function of the DPX701 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Push the Control knob towards [FM] or [AM]. Select the "AMS Control" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Control knob towards [FM] or [AM]. • For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. 4 Adjust the AMP Control item Push the Control knob towards [4] or [¢]. 5 Exit AMP Control mode Press the [MENU] button. Other than Standby mode Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Display Setting "TI : OFF"/ "TI OFF" The Traffic Information function is OFF. "TI : ON"/ "TI ON" The Traffic Information function is ON. When it is ON, the "TI" indicator is ON. (DPX501 only) When a traffic information station isn't being received the "TI" indicator blinks. When a traffic bulletin starts, "Traffic INFO"/ "TRAFFIC" is displayed it and it switches to traffic information. • During reception of an AM station when the Traffic Information function is turned ON, it switches to an FM station. • During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume. Receiving other traffic information stations (In tuner source) Push the Control knob towards [4] or [¢]. • You can change the traffic information station when listening to the radio. • You cannot use the LX AMP operation during standby mode. English | 43