Kenwood DPX501 Instruction Manual - Page 48
Audio Preset Recall, Demonstration mode Setting
View all Kenwood DPX501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Menu system Other than Standby mode Audio Preset Recall Recalling the sound setup registered by (page 47). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Audio Preset mode Push the Control knob towards [FM] or [AM]. Select the "Audio Preset"/ "A-PRESET" display. 4 Enter Audio Preset mode Press the Control knob for at least 1 second. 5 Select the Audio Preset Recall Push the Control knob towards [FM] or [AM]. Select the "Recall"/"RECALL" display. 6 Recall the Audio Preset Press the Control knob for at least 2 seconds. The "Recall"/"RECALL" display blinks 1 time. 7 Exit Audio Preset mode Press the [MENU] button. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Control knob towards [FM] or [AM]. Select the "DEMO Mode"/ "DEMO" display. 2 Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. Display "DEMO Mode : ON"/ "DEMO ON" "DEMO Mode : OFF"/ "DEMO OFF" Setting The Demonstration mode function is ON. Exit Demonstration mode (Normal mode). • The User memory of (page 12) is changed to the value which was recalled. • The source tone memory item of (page 12) is changed to the value which was recalled by the selected source. 48 | English