Kenwood DPX501 Instruction Manual - Page 56
Installation
View all Kenwood DPX501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installation Installing the Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory6 Installing in Japanese-Made Cars and General Motors Cars Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. 56 | English Car Bracket Accessory4 (M5 × 7 mm) or Accessory5(M5 × 6 mm)
56
|
English
Installing the Unit
Installation
Accessory
4
(M5 × 7 mm)
or Accessory
5
(M5 × 6 mm)
Installing in Japanese-Made Cars
and General Motors Cars
Install onto the car bracket using the supplied
screws (M5 × 6 mm, M5 × 7 mm).
The holes of the car bracket to use will differ
depending on the car model.
Car Bracket
Accessory
6
Firewall or metal support
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.