Home » Konica Minolta Manuals » Printers » Konica Minolta C3080P » Manual Viewer

Konica Minolta C3080P AccurioPress C2070/C3080 Series Daily Maintenance Guide - Page 129

Press [PrintMode] on the [Maximum Density Adj.] screen, and output the chart from the same tray

View all Konica Minolta C3080P manuals

Add to My Manuals
Save this manual to your list of manuals

Page 129 highlights

3.6 Details of quality adjustment items 3 26 Change the adjustment value according to the comparative result of the calculated value and the maximum density target value. % The change value of density differs according to the paper. Reference: The change value of density for POD gloss coat 128g/m2 -Y: Δ0.006/step -M: Δ0.01/step -C: Δ0.013/step -K: Δ0.01/step 27 Press [OK]. 28 Press [Exit [ADJUSTMENT]]. Wait for the display [Now adjusting] to disappear. 29 Press [PrintMode] on the [Maximum Density Adj.] screen, and output the chart from the same tray in step 5. 30 Measure all of the maximum density patch in order of K, C, M, and Y. Repeat the adjustment from step 25 to step 30 until the maximum density is within the acceptable target density range. Acceptable target density range: Y, M, C: from -5% to +5%, K: from -5% to +10% AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 3-58

Section	Page
Table of contents	4
1 Daily Care	7
1.1 About Daily Care	7
Care Timing	7
Care requirements	7
1.2 Cleaning the Duplex Part	8
1.3 Cleaning Main Body Tray	11
1.4 Cleaning Multi Bypass Tray MB-506 or Multi Bypass Tray MB-508	13
1.5 Cleaning Paper Feed Unit PF-602m	14
1.6 Cleaning Paper Feed Unit PF-707 or Paper Feed Unit PF-707m	18
1.7 Cleaning Large Capacity Unit LU-202m, Large Capacity Unit LU-202XL, or Large Capacity Unit LU- 202XLm	20
2 Both Sides Adjust	23
2.1 What is Both Sides Adjust?	23
2.2 Adjustment flow to use paper of a new brand, weight, or size	24
2.2.1 Adjustment Timing	24
2.2.2 Adjustment Order	24
2.3 Regular adjustment flow	25
2.3.1 Adjustment Timing	25
2.3.2 Adjustment Order	25
2.3.3 Periodical Both Sides Adjustment Function	26
2.4 Adjustment flow for each job	27
2.4.1 Adjustment Timing	27
2.4.2 Adjustment Order	27
2.5 How to Operate the Both Sides Adj. Item	28
2.5.1 Finely adjust the side guide plates of the paper tray (for PF-707/PF-707m/PF- 602m)	28
2.5.2 [Front] Adjustment	31
2.5.3 [Gap] Adjustment (Back side adjustment)	36
2.5.4 [Scan Meas.] Adjustment	41
2.5.5 [Rotate/Skew] Adjustment	51
2.5.6 [AutoMeasure] Adjustment	58
2.5.7 Registering Paper Profile	62
2.5.8 Back Side Fine Adjustment	64
2.5.9 [Periodical Both Sides Adj.]	69
3 Quality Adj.	73
3.1 Quality Adjustment for Image Controller IC-603/ Image Controller IC-605	73
3.2 Regular adjustment flow (Standard)	74
3.2.1 Adjustment timing	74
3.2.2 Adjustment sequence	74
3.3 Regular adjustment flow (High accuracy)	75
3.3.1 Adjustment Timing	75
3.3.2 Adjustment Order	75
3.4 Adjustment flow to use a new type of paper	76
3.4.1 Adjustment timing	76
3.4.2 Adjustment sequence	76
3.5 Adjustment Flow when changing the screen	77
3.5.1 Adjustment timing	77
3.5.2 Adjustment sequence	77
3.6 Details of quality adjustment items	78
3.6.1 Setting of the Custom Screen	78
3.6.2 [Gamma Automatic Adjustment]	80
Performing [Gamma Automatic Adj.]	80
3.6.3 [Density Balance Adjustment] (for i1Pro, i1Pro2, or i1iSisXL)	82
Saving the measured data of the density balance	90
3.6.4 [Density Balance Adjustment] (for FD-5BT)	92
3.6.5 Registering the adjusted value of the density balance in the machine	103
3.6.6 [Density Balance Auto. Adj.]	110
3.6.7 [Maximum Density Adjustment]	120
3.6.8 [Maximum Density Adjustment] (for i1Pro/i1Pro2)	121
3.6.9 [Maximum Density Adjustment] (for FD-5BT)	130
3.6.10 [Max. Density Auto Adj.]	138
3.6.11 Checking the Color Density Control Setting	141
3.6.12 [Color Density Manual Control]	144
3.6.13 About Controller Calibration	147
Executing Calibration	148
3.6.14 About Exact Color calibration	154
Executing Exact Color: Color Centro	155
Executing Exact Color: Touch panel	162
3.6.15 About G7 Calibration	165
Executing G7 Calibration: Color Centro	166
Executing G7 Calibration: Touch panel	172