Konica Minolta C3080P AccurioPress C2070/C3080 Series Daily Maintenance Guide - Page 34
Press [Exit PrintMode]., When the lengths at points [2]
View all Konica Minolta C3080P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2.5 How to Operate the Both Sides Adj. Item 2 10 Press [Exit PrintMode]. 11 Check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Be sure to make note of the measurement lengths. When the lengths at points [2], [4], [6], and [8] are within the respective ranges shown below, press [Close], then press [OK] to finish the adjustment. When the lengths at points [2], [4], [6], and [8] are outside the respective ranges shown below, also measure the lengths at points [1], [3], [5], and [7], then proceed to step 12. [2]: 200 mm ^ 0.3 mm [4]: 200 mm ^ 0.3 mm [6]: 200 mm ^ 0.3 mm [8]: 200 mm ^ 0.3 mm AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L 2-13
AccurioPress C2070/C2070P/C2060/C3080/C3080P/C3070, AccurioPrint C2060L/C3070L
2-13
2.5
How to Operate the Both Sides Adj. Item
2
10
Press [Exit PrintMode].
11
Check the lengths at points [2], [4], [6], and [8] on the second and third output charts.
Be sure to make note of the measurement lengths.
When the lengths at points [2], [4], [6], and [8] are within the respective ranges shown below, press
[Close], then press [OK] to finish the adjustment.
When the lengths at points [2], [4], [6], and [8] are outside the respective ranges shown below, also
measure the lengths at points [1], [3], [5], and [7], then proceed to step 12.
[2]: 200 mm
^
0.3 mm
[4]: 200 mm
^
0.3 mm
[6]: 200 mm
^
0.3 mm
[8]: 200 mm
^
0.3 mm