Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 107
System] tab, Description
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
5.1 [System] tab 5 Item [IP Address] [IPX Address] [E-mail Address] [Alert] [Notification Address] [Port Number] [Community Name] [Notification Address] [Node Address] [Community Name] [Notification Address] [Paper Empty] [Paper Jam] [Maintenance] [Toner Out] [Output Tray Full] [Fuser Unit End] [Operator Call] [Service Call] [Job Complete] [Job Error] Description Enter the destination IP address. Format: *.*.*.* (Asterisk * can be 0 to 255) If the DNS server has already been configured, you can enter the host name instead. For the host name, specify a fully-qualified domain name (FQDN). When using IPv6, you can specify the IPv6 address. Enter the port number of the SNMP trap. Default setting: 123 Enter a community name (up to 15 characters). Enter the IPX address using an 8-digit hexadecimal value. Enter the node address using a 12-digit hexadecimal value. Enter a community name (up to 15 characters). Enter the destination E-mail address (up to 320 characters). Sends a notification when the paper tray is empty. Sends a notification when a page has been jammed. Sends a notification when the periodical inspection is required. Sends a notification when the toner is empty. Sends a notification when the capacity of the output tray has been exceeded. Sends a notification when the fusing unit needs to be replaced. Sends a notification when a error has occurred. Sends a notification when a service call has occurred. Sends a notification when the job has finished. Sends a notification when the job has ended abnormally. bizhub 42/36 5-19