Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 15

2.1 Control Panel and functions No. Name 8 Interrupt 9 Stop 10 Start 11 Keypad 12 C (Clear) 13 Error Indicator 14 Data Indicator 15 Utility/Counter 16 Mode Memory 17 Access 2 Description Press this key to enter Interrupt mode. While the machine is in Interrupt mode, the indicator on the Interrupt key lights up in green. To cancel Interrupt mode, press the Interrupt key again. Pressing this key while copying, scanning or printing temporarily stops the operation. Press to start the copy, scan or fax operation. Allows you to specify the number of copies. Allows you to enter the magnification. Allows you to enter various settings. Clears a value (such as the number of copies, a zoom ratio and size) entered using the Keypad. Flashes in orange if an error occurred. Lights up in orange when the service representative is being called. Flashes in blue while a print job is being received. Lights up in blue when a print job is queued to be printed or while it is being printed. Press to display the [Utility Settings] screen. From the [Utility Settings] screen, settings can be specified for the parameters in the [Accessibility], [Meter Count], [Address Registration], [User Settings], and [Admin Settings] screens. Allows you to register (store) the desired copy/fax/scan settings as a program or to recall a registered program. If user authentication or account track settings have been applied, press the Access key after entering the user name and password (for user authentication) or the account name and password (for account track) in order to use this machine. While logged on, press the Access key to log off. bizhub 42/36 2-3