Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 206
E-mail RX POP]
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
5.7 [Network] tab 5 [E-mail RX (POP)] Select [Network] ö [E-mail Settings] ö [E-mail RX (POP)]. Item [E-mail RX (POP)] [POP Server Address] [Port Number] [SSL/TLS] [Port Number (SSL)] [Login Name] [Change Password] [Password] [Connection Timeout] [APOP Authentication] [Auto Check of Arrival] [Polling Rate] Description If [Enable] is selected, e-mail messages can be received. Enter the POP server address. Format: *.*.*.* (Asterisk * can be 0 to 255) If the DNS server has already been configured, you can enter the host name instead. For the host name, specify a fully-qualified domain name (FQDN). When using IPv6, you can specify the IPv6 address. Specify number of the port for communicating with the POP server. Select whether or not to encrypt a communication between this machine and the POP server using SSL/TLS. If [Disable] is selected, [Port Number (SSL)] is grayed out. Enter the port number to be used for SSL communication. Enter the login name of the POP server (up to 63 characters). Select this check box to change the password. Enter the password to log in to the POP server (up to 15 characters). Specify the timeout period for a communication with a server. Select [Enable] to encrypt the login name and password when logging on to the POP server. The password is encrypted with MD5 when APOP is used to log on to the POP server. Before selecting [Enable], check whether the POP server supports APOP. If the POP server does not support APOP, an error will occur, resulting in communication failure. Select whether or not automatic reception is performed. If [Disable] is selected, you cannot configure the [Polling Rate] setting. Enter the interval where reception is checked via automatic connection to the POP server. bizhub 42/36 5-118