Konica Minolta bizhub 4750 bizhub 4750/4050 Applied Functions User Guide - Page 50
[Network] tab, [General Settings] - [Ethernet Settings], [TCP/IP Settings] - [TCP/IP Settings]
View all Konica Minolta bizhub 4750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
1.5 Available operations in Administrator mode 1 1.5.7 [Network] tab [General Settings] - [Ethernet Settings] To display: Administrator mode - [Network] - [General Settings] - [Ethernet Settings] Specify the network speed, and check the MAC address. Item [Speed/Duplex] [MAC Address] Description Select the network speed according to your environment. [Auto] is specified by default. Displays the MAC address of the network interface card of this machine. [General Settings] - [Local Interface Settings] To display: Administrator mode - [Network] - [General Settings] - [Local Interface Settings] Change the time-out time to limit a communication with the computer. Item [I/O Timeout] Description When this machine is connected via a USB device to the computer, change the communication time-out time if necessary. [60] sec. is specified by default. [TCP/IP Settings] - [TCP/IP Settings] To display: Administrator mode - [Network] - [TCP/IP Settings] - [TCP/IP Settings] Configure the TCP/IP settings. Item [TCP/IP] [LPD] [SLP] [LLMNR] Description Select whether or not to use TCP/IP. [Enable] is specified by default. Select whether or not to use LPD (Line Printer Daemon). [Enable] is specified by default. Select whether or not to use SLP (Service Location Protocol). [Enable] is specified by default. Select whether or not to use LLMNR (Link-local Multicast Name Resolution). [Enable] is specified by default. [TCP/IP Settings] - [IPv4 Settings] To display: Administrator mode - [Network] - [TCP/IP Settings] - [IPv4 Settings] Assign an IP address (IPv4) to this machine. Item [IP Address Setting Method] [IP Address] [Subnet Mask] [Default Gateway] [Domain Name Automatic Acquisition] [DNS Server Automatic Acquisition] Description When automatically specifying the IP address, select the method for automatic retrieval. • [DHCP]: [ON] (selected) is specified by default. • [BootP]: [OFF] (not selected) is specified by default. • [ARP/PING]: [OFF] (not selected) is specified by default. • [Auto IP]: [ON] (selected) is specified by default. When manually specifying the IP address, enter the fixed IP address. When manually specifying the IP address, enter the subnet mask. When manually specifying the IP address, enter the default gateway. When using the DHCP or other protocols, select whether or not to automatically retrieve the domain name. [Enable] is specified by default. Select whether or not to automatically obtain the address of the DNS server. [Enable] is specified by default. [Applied Functions] 1-44