Konica Minolta bizhub 4750 bizhub 4750/4050 Applied Functions User Guide - Page 59

[SNMP Settings], Network] - [SNMP Settings] - [SNMP Settings]

Page 59 highlights

1.5 Available operations in Administrator mode 1 [SNMP Settings] To display: Administrator mode - [Network] - [SNMP Settings] - [SNMP Settings] Configure the settings for obtaining the machine information and monitoring the machine using SNMP (Simple Network Management Protocol). Item [SNMP Settings] [SNMP] [SNMP v1/v2c (IP)] [SNMP v3 (IP)] [UDP Port] [SNMP v1/v2c Settings] [Read Community Name] [Write] [Write Community Name] [SNMP v3 Settings] Description Configure the SNMP settings. Select whether or not to use SNMP. [Enable] is specified by default. Select whether or not to use SNMP v1 or SNMP v2. [Enable] is specified by default. Select whether or not to use SNMP v3. [Enable] is specified by default. If necessary, change the UDP port number. [161] is specified by default. Configure the SNMP v1/v2c settings. Enter a read-only community name (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [public] is specified by default. Select whether or not to enable the read and write functions. [Enable] is specified by default. If [Write] is set to [Enable], enter the community name in the read-write enable state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and #). [private] is specified by default. Configure the SNMP v3 settings. [Applied Functions] 1-53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146

1.5
Available operations in Administrator mode
1
[Applied Functions]
1-53
[SNMP Settings]
To display:
Administrator mode
- [Network] - [SNMP Settings] - [SNMP Settings]
Configure the settings for obtaining the machine information and monitoring the machine using SNMP (Sim-
ple Network Management Protocol).
Item
Description
[SNMP Settings]
Configure the SNMP settings.
[SNMP]
Select whether or not to use SNMP.
[Enable] is specified by default.
[SNMP v1/v2c (IP)]
Select whether or not to use SNMP v1 or SNMP v2.
[Enable] is specified by default.
[SNMP v3 (IP)]
Select whether or not to use SNMP v3.
[Enable] is specified by default.
[UDP Port]
If necessary, change the UDP port number.
[161] is specified by default.
[SNMP v1/v2c Settings]
Configure the SNMP v1/v2c settings.
[Read Community
Name]
Enter a read-only community name (using ASCII characters of up to 15 bytes,
excluding spaces, \, ,' ,", and #).
[public] is specified by default.
[Write]
Select whether or not to enable the read and write functions.
[Enable] is specified by default.
[Write Community
Name]
If [Write] is set to [Enable], enter the community name in the read-write enable
state (using ASCII characters of up to 15 bytes, excluding spaces, \, ,' ,", and
#).
[private] is specified by default.
[SNMP v3 Settings]
Configure the SNMP v3 settings.