Konica Minolta bizhub 501 bizhub 361/421/501 Security Function User Manual - Page 94
Changing the Flash Memory Lock Password
View all Konica Minolta bizhub 501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Administrator Operations 2 2.13.2 Changing the Flash Memory Lock Password 2 Note Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings. 2 Note When the main power switch is turned OFF and ON, wait at least 10 seconds to turn it ON again after turning it OFF. If there is no interval between turning the main power switch OFF and ON, the machine may not function properly. Here is the sequence through which the main power switch and sub power switch are turned ON and OFF. Turn off the sub power switch → Turn off the main power switch → Turn on the main power switch → Turn on the sub power switch. 0 To call the Flash Memory Lock Password entry screen to the display, see steps 1 through 3 of "Setting the Flash Memory Lock Password" on page 2-74. 1 Call the Flash Memory Lock Password entry screen to the display from the control panel. 2 Enter the 20-digit Flash Memory Lock Password from the keyboard and key pad. - Press the [C] key to clear all characters. - Touch [Delete] to delete the last character entered. - Touch [Shift] to show the upper case/symbol screen. - Touch [Cancel] to go back to the Security Settings screen. 3 Select [Edit] and touch [OK]. ? What happens if the Flash Memory Lock Password entered does not meet the requirements of Password Rules? % If the Flash Memory Password entered does not comply with the Password Rules, a message appears saying that the Flash Memory Password entered cannot be used. Enter the correct Flash Memory Lock Password. For details of the Password Rules. 501/421/361 2-77