Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 142
NEXT Start-Color, Start-B&W, Select, Start
View all Konica Minolta magicolor 1690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
2 Press the Scan key to enter Scan mode. 3 Specify the desired scan settings. " For details on specifying the destination of the data, refer to "Spec- ifying the Data Location" on page 6-10 and "Specifying the Desti- nation Address (Scan to E-mail/FTP/SMB)" on page 6-12. For details on selecting the data format, refer to "Selecting the Data Format" on page 6-26. For details on selecting the scan quality setting, refer to "Selecting the Scan Quality Setting" on page 6-27. For details on setting the scan size, refer to "Setting the Scan Size" on page 6-28. For details on setting the color of the scan data, refer to "Setting the Scan Color" on page 6-28. For details on specifying the subject when sending data, refer to "Specifying the Subject" on page 6-28. 4 To scan color scans, press the Start-Color key. To scan monochrome scans, press the Start-B&W key. If the document was loaded in the ADF, scanning begins, and then the data is sent to the specified location. If the document was placed on the original glass, continue with step 5. " Scanning with the Scan to PC operation is possible only if this machine is connected to a computer using a USB cable. 5 When NEXT PAGE? appears in the message window, place the second document page on the original glass, and then press the Select key. " When scanning with the Scan to PC operation, a multi-page docu- ment cannot be scanned with the original glass. To scan a multi-page document, load the document into the ADF. 6 Press the + or , key to select the size of the document positioned in step 5, and then press the Select key. 7 After all document pages have been scanned, press the Start key. The scanned document is sent to the specified location. " If the Stop/Reset key is pressed while scanning, JOB CANCEL appears. To continue scanning, select NO. To stop scanning, select YES. " To cancel a job where scanning was finished and the data is queued to be sent, refer to "Deleting a Queued Transmission Job" on page 6-29. Scanning With the Machine 6-9