Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 42
Toner Remaining, T/c Change, Replace Mode, Eject Mode - change k toner
View all Konica Minolta magicolor 1690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
TONER REMAINING A general estimate of the amount of toner remaining in the toner cartridges can be viewed. " If the Select key is held down for at least 2 seconds while the screen described above is displayed, the configuration page will be printed. T/C CHANGE REPLACE MODE EJECT MODE Switches the machine to the REPLACE MODE. This mode is used when replacing a toner cartridge. For details on replacing a toner cartridge, refer to "Replacing a Toner Cartridge" on page 7-5. " To return to normal operation mode from REPLACE MODE, press the Stop/Reset key. Switches the machine to the EJECT MODE. This mode is used when removing all toner cartridges. For details on removing all toner cartridges, refer to "Removing All Toner Cartridges" on page 7-11. " To return to normal operation mode from EJECT MODE, press the Stop/Reset key. Checking the Machine Status and Settings 2-15