Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 243
set too dark., Select a lighter copy density.
View all Konica Minolta magicolor 1690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Symptom Cause Solution Image is too The print head win- light; there is dow is dirty. low image density. The copy density is set too light. Clean the print head window. Select a darker copy density. The media is moist Remove the moist media and replace from humidity. with new, dry media. There is not much toner left in the cartridge. Replace the toner cartridge. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. Media type is set incorrectly. When printing envelopes, labels, letterhead, postcards or thick stock, specify the appropriate media type in the printer driver. Image is too The copy density is Select a lighter copy density. dark. set too dark. The document was not pressed close enough against the original glass. Position the document so that it is pressed close enough against the original glass. For details on positioning the document on the original glass, refer to "Placing a document on the original glass" on page 3-28. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. The imaging cartridge Remove the imaging cartridge and may be defective. check for damage. If it is damaged, replace it. 9-32 Solving Problems with Printing Quality