Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 176

7 Follow the same procedure to remove the cartridges for the cyan, black, then yellow toners. 8 Press the Stop/Reset key to reset the machine. Replacing the Imaging Cartridge When replacing an imaging cartridge, refer to the following table. For optimum print quality and performance, use only approved KONICA MINOLTA imaging cartridge for your specific machine type, as listed in the table below. You can find your machine type and the imaging cartridge part numbers on the consumables reorder label inside the ADF cover. Machine Machine Part Type Number Part Name Imaging Cartridge Part Number AM A0HF 012 Imaging Cartridge A0VU 011 EU A0HF 022 A0VU 0Y1 AP A0HF 042 A0VU 0Y1 GC A0HF 082 A0VU 0Y1 " For optimum print quality and performance, use only the corre- sponded TYPE genuine KONICA MINOLTA imaging cartridge. " You are advised to replace the imaging cartridge when the message I/C LIFE END/REPLACE I/C appears. 1 Open the scanner unit. " If there is paper in the output tray, remove it, and then fold up the out- put tray before opening the scanner unit. Replacing Consumables 7-13