Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 86

Weight Duplexing Thick Stock 1: 91 to 163 g/m2 (25 to 43.5 lb bond) Thick Stock 2: 164 to 209 g/m2 (43.6 to 55.6 lb bond) Not supported DO NOT use thick stock that is „ Mixed with any other media in the trays (as this will cause media misfeeding) Envelope Print on the front (address) side only. Some parts of the envelope consist of three layers of paper-the front, back, and flap. Anything printed in these layered regions may be lost or faded. You can print continuously with envelope. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1 Up to 10 sheets, depending on their thickness Tray 2 Not supported Orientation Face up Driver Envelope Media Type Duplexing Not supported Use envelopes that are „ Envelope C6 or Envelope DL (Other envelope sizes are not supported.) „ Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps " Because the envelopes pass through heated rollers, the gummed area on the flaps may seal. Using envelopes with emulsion-based glue avoids this problem. „ Approved for laser printing „ Dry Print Media 3-5