Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 198
Cleaning the Media Feed Rollers for Tray 2, temporarily place it on a sturdy
View all Konica Minolta magicolor 1690MF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Cleaning the Media Feed Rollers for Tray 2 Be sure to remove the duplex option before cleaning the media feed rollers for Tray 2. 1 If the duplex option is installed, remove it. " If the duplex option is not installed and the locking pins are installed at the back of Tray 2, remove the locking pins (one in each opening on the left and right sides at the back of Tray 2). To remove a locking pin, turn it to either the left or the right so that its grip is vertical, and then pull out the locking pin to remove it. 2 Remove the dust cover from Tray 1 and close the tray. 3 Lift the machine off of Tray 2 and temporarily place it on a sturdy flat surface. 4 Clean the media feed rollers by wiping them with a soft, dry cloth. Cleaning the Machine 8-11