Konica Minolta magicolor 1690MF magicolor 1690MF Printer / Copier / Scanner Us - Page 143

Specifying the Data Location Select whether the computer or USB memory device is the location where scan data is to be saved. When transmitting via a network, refer to "Specifying the Destination Address (Scan to E-mail/FTP/SMB)" on page 6-12. " If an address has been specified as the destination for the data, SCAN TO PC and SCAN TO USB MEMORY cannot be selected. Saving Data on a Computer Connected (Scan to PC) In order to perform Scan to PC operations, the following requirements must be met. z This machine is connected to a computer using a USB cable. z The TWAIN scanner driver, the printer driver and LinkMagic (Windows only) are installed on the computer. z Either LinkMagic is activated or the LinkMagic icon appears in the Windows notification area. z The document is positioned at the location specified with Paper Source (Flatbed (original glass) or ADF) in LinkMagic. " For details on LinkMagic, refer to the Reference Guide on the Docu- mentation CD/DVD. Follow the procedure described below to send scan data to a computer connected to this machine. " The scan settings specified with LinkMagic are given priority. Specify the various settings with LinkMagic. For details, refer to the Reference Guide on the Documentation CD/DVD. 1 In the main screen (Scan mode), press the + or , key to select SCAN TO, and then press the Select key. 2 Press the + or , key to select SCAN TO PC, and then press the Select key. " The scan data is saved in the folder specified with LinkMagic. For details, refer to the Reference Guide on the Documentation CD/DVD. 6-10 Scanning With the Machine