Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 30

Names of Parts Operation Panel 1 2 4 5 6 78 9 10 11 12 13 14 3 2-4 Ready to copy. * A 4 100% Zoom Set: 1 A 4 15 17 19 20 16 18 21 23 24 27 26 22 25 28 29 1 Status/Job Cancel Key and Indicator - Press this key to light the indicator to access the Status menu screen. For details, refer to Chapter 4 in Advanced Operation Guide. 2 Copy Key and Indicator - Press this key to use the copier functions of this machine. The indicator will light when the machine is in the copier operation mode. 3 E-Mail (Scan) Key and Indicator - Press this key to use the scanner functions of this machine. The indicator will light when the machine is in the scanner operation mode. 4 One-touch Keys (1 to 8) - The one-touch keys can be used to register destination information. For details, refer to Chapter 5, Advanced Operation Guide, Registering Destination E-mail Address. Enter the information for the registered destinations onto the supplied one-touch key sheet and insert the sheet between the one-touch keys from the bottom side of the operation panel. 5 Scan Color Select Key and Indicator - Press this key to light the indicator to change the Scan Color mode. For details, refer to Chapter 2 in Advanced Operation Guide, Selecting Scan Color Mode. 6 Scan Resolution Key and Indicator - Press this key to light the indicator to change the scan resolution. For details, refer to Chapter 2 in Advanced Operation Guide, Selecting the Scanning Resolution. 7 Function Key and Indicator - Press this key to light the indicator to access the Function screen. 8 Print Indicator - This indicator flashes green when the machine is processing a printing job. 9 Send/Receive Indicator - This indicator flashes green when the machine is sending or receiving data. 10 Error Indicator - This indicator flashes red when an error has occurred. In this case, check the message display and perform the appropriate procedure to correct the error. See page 7-3. This indicator lights red when the machine is experiencing a mechanical problem. Turn the power switch off ({) and then back on ( | ) again. If the Error indication does not go out, make a note of the message that appears in the message display. 11 System Menu/Counter Key and Indicator - Press this key to light the indicator to perform default settings, change the language on the display, etc. (For details, refer to Chapter 5 in Advanced Operation Guide.) 12 Keypad - Use these keys to set the number of copies to be made or enter other values. You can also use these keys to enter characters. 13 Reset/Power Key - Press this key to reset all temporary configurations previously made. The machine returns to the initial mode†. Press down on this key for at least two seconds to engage the sleep mode. To release the machine from the sleep mode, press the same key again. (See page 4-12.)