Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 95
Maintenance and Error Messages, Message, Procedure, Reference select, Enter
View all Kyocera KM-1815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Troubleshooting Maintenance and Error Messages When any of the following messages appears on the message display, perform the procedure provided below. Message Procedure Add paper to (paper source). The paper has run out. Supply paper according to the paper source that is Casset. 1 or Casset. 2 (with option paper feeder) and MP Tray. Reference Page 3-1 The cassette is not properly closed. Make sure the cassette is closed securely. Close Document Processor The document processor is still open even though an original has - been set. Close the document processor. Close Document Processor The left cover to the document processor is open. - Cover. Close the cover securely. Close Top Cover. The top cover or the front cover is open. - Close the covers securely. Error occurred Turn the power switch off ({) and then back on ( | ) again. If this - Call service person. message still remains, make a note of the number that is C#### displayed together with the letter C. Then, turn the power switch off ({), and contact your service representative or authorized service center. Insert Cassette1. The paper feeder was selected, but the upper cassette is not - installed or is not inserted properly. Push the upper cassette securely into the machine. KPDL error Current print processing cannot continue. - Job is ended. If you want to cancel printing, press the right select key. If Auto #### Error Clear is set to On, printing will be automatically resumed after a preset period of time. Refer to Chapter 5 in Advanced Operation Guide, Auto Error Clear. Load paper in Cassette1. There is no paper in the indicated cassette. Press the right select 3-1 Size # Type # key. Load paper in Cassette2. If you have loaded paper in the cassette, select Print Size # Type # (Continue) and press the Enter key. Load paper in MP Tray. Size # Type # To switch to another paper feed location, select Paper select and press the Enter key. The available paper feed locations will be displayed. Select the desired paper feed location and press the Enter key. Memory overflow. The machine's memory is full. Press the left select key to cancel 5-4 Part of the job end is the copying procedure. printed. Set a lesser number of originals and try to copy again. Try adding more memory. See Expansion Memory on page 5-4. Paper Jam at Cassette1. A paper jam has occurred. Press the left select key to cancel the 7-6 Paper Jam at Cassette2. copying procedure. Paper Jam at MP Tray. Refer to Paper Jam on page 7-6 and remove the jammed paper. Paper Jam at Document Processor. Paper Jam in Printer. 7-3