Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 94

CLEANER HOME, POSITION, Symptom, Check Item, Corrective Action, Reference

Page 94 highlights

Troubleshooting Symptom Check Item Corrective Action Reference Page Black or white vertical Is the charger cleaner in its home Remove the process unit and return 6-4 bands appear on the position (marked CLEANER HOME the charger cleaner to its home copies. POSITION)? position. If you are using the optional Clean the slit glass. 6-1 document processor, is the slit glass dirty? It is also possible to use the Scan Noise Reduction function to make black lines on the copies less apparent. For details, refer to Chapter 5 in Advanced Operation Guide, Turning Scan Noise Resolution On and Off. The copy image is Were the originals set correctly? When setting originals on the platen, 4-3 sheared. align them flush up against its upper left corner. When setting originals in the optional 5-2 document processor, align the original insert guides securely before setting the originals. Paper jams occur often. Is the paper loaded properly in the Load the paper properly. 3-1 cassette? Is the paper curled, folded or Replace the paper with new paper. - wrinkled? Is there any jammed paper or loose Carry out the appropriate procedure 7-6 scraps of paper remaining inside the to remove the paper. machine? Does the registered paper size Make sure the registered paper size - match the size you are actually matches the size you are actually using? using. The Add Toner indicator Did you shake the new toner Shake the toner container a number - doesn't go out even after container enough? of times. replacing the toner container. 7-2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

Troubleshooting
7-2
Black or white vertical
bands appear on the
copies.
Is the charger cleaner in its home
position (marked
CLEANER HOME
POSITION
)?
Remove the process unit and return
the charger cleaner to its home
position.
6-4
If you are using the optional
document processor, is the slit glass
dirty?
Clean the slit glass.
It is also possible to use the Scan
Noise Reduction function to make
black lines on the copies less
apparent. For details, refer to
Chapter 5
in
Advanced Operation
Guide
,
Turning Scan Noise
Resolution On and Off
.
6-1
The copy image is
sheared.
Were the originals set correctly?
When setting originals on the platen,
align them flush up against its upper
left corner.
4-3
When setting originals in the optional
document processor, align the
original insert guides securely before
setting the originals.
5-2
Paper jams occur often.
Is the paper loaded properly in the
cassette?
Load the paper properly.
3-1
Is the paper curled, folded or
wrinkled?
Replace the paper with new paper.
Is there any jammed paper or loose
scraps of paper remaining inside the
machine?
Carry out the appropriate procedure
to remove the paper.
7-6
Does the registered paper size
match the size you are actually
using?
Make sure the registered paper size
matches the size you are actually
using.
The Add Toner indicator
doesn’t go out even after
replacing the toner
container.
Did you shake the new toner
container enough?
Shake the toner container a number
of times.
Symptom
Check Item
Corrective Action
Reference Page