Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 96
Advanced Operation, Guide, Auto Error Clear, Advanced, Operation Guide
View all Kyocera KM-1815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Troubleshooting Message Place original and press Start key. Procedure Reference Page The machine will attempt to make copies from any originals that - remain uncopied. Reset all of the originals on the original table and try to copy again. Print overrun The data transferred to the machine was too complex to print on a - This page isn't complete. page. To continue printing, press the right select key. To cancel printing, press the left select key. Remove originals in Document Processor. This appears if there is a document in the document processor 7-10 when the power is turned on. It also appears when the paper has jammed while being fed from the document processor because of the way it was placed. Remove all the document pages inside the document processor, and set them again correctly. Replace Toner. Toner has run out so further copying or printing is impossible. 6-2 Replace the toner container using a new toner kit. Scan memory overflow. Job Scan memory overflow. Job is ended. Press the left select key to 5-4 is ended. cancel the copying procedure. The total amount of data received by the machine exceeds the machine's internal memory. To verify the current amount of memory, print out a Status Page. To cancel printing, press the right select key. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. Refer to Chapter 5 in Advanced Operation Guide, Auto Error Clear. Lower the image quality. Refer to Chapter 2 in Advanced Operation Guide, Selecting Image File Format. 7-4