Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 34
Adjusting the Paper Stopper, for Folio or Oficio II Size Notes
View all Kyocera KM-1815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Preparations 2 Adjust the paper stopper in the rear portion of the cassette by pressing in on the release buttons and sliding the paper stopper to the fit the size of the paper being loaded. The paper sizes are marked on the bottom of the cassette. The factory default setting is A4/Letter size paper. For information on adjusting the paper stopper for Folio or Oficio II size paper, see Adjusting the Paper Stopper for Folio or Oficio II Size Page on page 3-3. 3 Adjust the paper width guides on both sides of the cassette by pressing in on the release buttons and sliding the guides to fit the width of the paper being loaded in the cassette. 4 Set the paper in the cassette so that the leading edge is aligned against the paper stopper, but making sure that none of the paper gets caught on the overhanging tabs. Notes • Always adjust the paper stopper and paper width guides before loading paper into the cassette. Failure to do so may result in skewed paper feed and/or a paper jam. • Make sure that the paper is set securely against the paper stopper and the paper width guides. If there is any gap between the paper and the stopper or guides, readjust the paper stopper and/or the paper width guides, as appropriate. • Make sure to face the side to be printed downward. • Be sure to load paper so that it is not folded or curled, etc. • Do not load more paper than indicated by the lines located on the width guides. 5 Push the cassette securely all the way back into the machine until it stops. 3-2