Kyocera KM-1815 1815 Operation Guide (Basic) Ver 1.1 - Page 93
Troubleshooting, General Guidelines
View all Kyocera KM-1815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
7 Troubleshooting General Guidelines The table below provides basic solutions for problems you may encounter with the machine. We suggest you consult this table to troubleshoot the problems before calling for service. Symptom Check Item Corrective Action Reference Page Nothing lights on the Is the power plug connected to an Connect the plug to an AC outlet. - operation panel when the AC outlet? power switch is turned on. No copies come out when Is there some indication of the Check the appropriate response to 7-3 the Start key is pressed. trouble on the operation panel? that indication and perform the corresponding procedure. The copies come out Were the originals set correctly? When setting originals on the platen, 4-3 blank. set them face-down. When setting originals in the optional 5-2 document processor, set them face-up. The copies come out too Is the copier in the Auto Exposure In order to adjust the overall - light. Adjustment mode? exposure level, perform the Auto Exposure Adjustment procedure. Is the copier in either the Photo, Adjust the exposure to the correct 4-2 Text+Photo, or Text mode? level. To adjust the overall exposure, - perform the corresponding exposure adjustment procedure. Is the copier in the EcoPrint mode? Select an image quality mode other - than the EcoPrint mode. Is the Add Toner indicator lit? Replace the toner container. 6-2 Is the copy paper wet? Replace the copy paper with new 3-1 paper. The copies come out too Is the copier in the Auto Exposure In order to adjust the overall - dark. Adjustment mode? exposure level, perform the Auto Exposure Adjustment procedure. Is the copier in either the Photo, Text Adjust the exposure to the correct 4-2 +Photo, or Text mode? level. To adjust the overall exposure, - perform the corresponding exposure adjustment procedure. The copies are dirty. Is the platen or the optional document processor dirty? Clean the platen and/or the optional 6-1 document processor. Remove the process unit and 6-4 perform the cleaning operation on the charger. 7-1