Kyocera TASKalfa 620 Scan System (H) Operation Guide Rev-1 (Functions Edition) - Page 19
Continuous Scan, One Per File, File Name
![]() |
View all Kyocera TASKalfa 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Scanner Settings Continuous Scan Configure Continuous Scan for default settings mode. The setting items are as follows. Item On Off Description Enables Continuous Scan. Disables Continuous Scan. For further details on Continuous Scan, refer to page 1-8. 1 Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default function screen. 2 Press [] or [] to select Continuous Scan and press [Change #]. 3 Select [On] or [Off]. 4 Press [Close]. The display returns to the Setting default function screen. One Page Per File Configure One Page Per File for default settings mode. The setting items are as follows. Item On Off Description Enables One Page Per File. Disables One Page Per File. For further details about One Page Per File, see page 1-9. 1 Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default function screen. 2 Press [] or [] to select One Page Per File (Output Each Page) and press [Change #]. 3 Select [On] or [Off]. 4 Press [Close]. The display returns to the Setting default function screen. File Name Set the scanner image filename for default settings mode. NOTE: Enter the filename using less than 16 characters. For further details on scanner image file name, refer to page 1-5. 1 Referring to Accessing the Setting default function Screen on page 1-11, access the Setting default function screen. 2 Press [] or [] to select File Name and press [Change #]. 3 Press [Change]. 4 Enter the filename and press [End]. 5 Press [Close]. The display returns to the Setting default function screen. 1-13
![](/manual_guide/products/kyocera-taskalfa-620-scan-h-operation-guide-rev1-functions-edition-962d1da/19.png)