LG LRSC26980TT Service Manual - Page 103
How To Disassemble And Assemble
![]() |
View all LG LRSC26980TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
HOW TO DISASSEMBLE AND ASSEMBLE 1. DOOR 1) Remove lower cover and then disconnect water supply tube in the lower part of freezer door. • Pull the water supply tube ባ forward while pressing on the coupling ቢ as shown in the drawing. 1 2 w Disconnecting the tube under the door causes about 1.5 litters water to flow out. Please put up a big container to prevent it. 2) Remove a freezer door. (1) Loosen hinge cover screw of freezer door and remove cover. Disconnect all connecting lines except grounding cord. Hinge Cover 2 Connecting Line (3) Disconnect upper hinge ቢ from the hinge supporter ባ by grasping the front part of upper hinge and lifting up (Hinge Assembly, U) in arrow direction A and pull forward in arrow B direction. Be careful because the door may fall, damaging the door, the floor, or injuring you. 1 2 A A B (4) Lift up the freezer door ቢ in arrow direction and disconnect the door from the lower hinge ባ. Don't pull the door forward. 1 2 Earthing Cord (2) Turn hinge lever in arrow A direction until it is loosened and take it out in arrow B direction. Hinge Lever A B Note : • Lift up the freezer door until a water supply tube is fully taken out. (5) Assembly is the reverse order of disassembly Note : • When disconnecting refrigerator door, turn hinge lever counterclockwise. • If the hinge or bracket are bent during assembly, use two extra screws (Tap Tite M6, Left Hinge attaching screw) in the holes of the upper hinge. - 103 -
![](/manual_guide/products/lg-lrsc26980tt-service-manual-b466509/103.png)