LG LRSC26980TT Service Manual - Page 63
Trouble Diagnosis - troubleshooting
![]() |
View all LG LRSC26980TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TROUBLE DIAGNOSIS Troubleshooting PROBLEM 1. Faulty start CAUSE/CHECK POINTS 1) No power at outlet. 2) No power on cord. Bad connection between adapter and outlet. (faulty adapter) The Inner diameter of adapter. The distance between holes. The distance between terminals. The thickness of terminal. Bad connection between plug and adapter (faulty plug). The distance between pins. Pin outer diameter. 3) Shorted start circuit. No power on Disconnected copper wire. power cord. Internal electrical short. Power cord is disconnected. Faulty soldering. Faulty terminal contact. Loose contact. - Large distance between male terminal. - Thin female terminal. Terminal disconnected. Bad sleeve assembly. OLP is off. Disconnected. Weak connection. Short inserted cord length. Worn out tool blade. Capacity of OLP is small. Characteristics of OLP is bad. Bad connection. Power is disconnected. Inner Ni-Cr wire blows out. Bad internal connection. Faulty terminal caulking (Cu wire is cut). Bad soldering. REMARKS * Measuring instrument: Multi tester I Check the voltage. If the voltage is within ±85% of the rated voltage, it is OK. I Check the terminal movement. I Check both terminals of power cord. Power conducts:OK. No power conducts:NG I Check both terminals of OLP If power conducts:OK. If not:NG. No electric power on compressor. - Faulty compressor. Faulty PTC. Power does not conduct. - Damage. Bad characteristics. - Initial resistance is big. Bad connection with Too loose. compressor. Assembly is not possible. Bad terminal connection. 4) During defrost. Start automatic defrost. Cycle was set at defrost when the refrigerator was produced. I Check the resistance of both terminals. At normal temperature 6: OK. If disconnected:∞. - 63 -
![](/manual_guide/products/lg-lrsc26980tt-service-manual-b466509/63.png)