LG LRSC26980TT Service Manual - Page 24

OptiChill Thawing & Express Chill Control, 7-3. OptiChill Temperature Control

Page 24 highlights

MICOM FUNCTION 2-7-2. OptiChill Thawing & Express Chill Control 1. When you press the SELECT button on the right, the THAW LED will light. The time for the selected function will be shown. You can cycle through the options in this order: EXPRESS CHILL/THAW OFF¡EXPRESS CHILL (90 Min.)¡ THAW 0.5 lbs. (4 hours)¡THAW 1.5 lbs. (8 hours)¡THAW 3.5 lbs. (12 hours)¡EXPRESS CHILL/THAW OFF. If EXPRESS CHILL/THAW is selected, the NOTCH temperature in the Optichill will not be displayed. 2. If EXPRESS Chill is selected, the Optichill damper is opened and the fan motor is turned on. If the Optichill does not reach the set temperature after no more than ninety minutes, the setting is released. 3. The Optichill will count down from 90 minutes and show the remaining time in minutes. 4. When the EXPRESS CHILL cycle ends (or is released), the setting defaults to FRUIT VEGE (39°F). 5. If THAW is selected, the Optichill damper is closed and the time and temperature will be set according to the thawing function selected. The thawing function will be automatically terminated at the end of the set time. 6. When in THAW mode, the sensor controls the heater to keep the set temperature. 7. When in THAW mode, the display counts down the remaining time in minutes. 8. When the THAW mode is released, the Optichill automatically defaults to CHILLED ROOM (30°F). u LRSC26930** 2-7-3. OptiChill Temperature Control 1. The Optichill is in the bottom of the refrigerator compartment and allows the user to select and adjust the temperature based on the type food stored there. Selections include meat, fish, fruits and vegetables, etc. Storing foods at the proper temperature allows them to be stored for longer periods. 2. The Optichill consists of a temperature sensor, a damper between the Optichill and the freezer, and a temperature control/display at the top. 3. At initial power-up, the Optichill defaults to FRUIT VEGE. If the refrigerator door is opened, the Optichill LED will be on. 4. When you press the SELECT button on the left, the LED will light and indicate the setting. The time for the selected function will be shown. You can cycle through the options in this order: FRUIT VEGE (39°F)¡CHILLED ROOM¡PARTIAL FREEZING¡FRUIT VEGE. The display will indicate the temperature for the selected setting. 5. The Optichill sensor detects the temperature and relays that information to the MICOM. When the set temperature is reached, the Optichill damper is closed. If the temperature rises, the damper is opened to allow the temperature to fall again. 6. If the Optichill damper hasn't moved within an hour, it is automatically moved and returned to its original setting once every hour to keep it from freezing in one position. - 24 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131

2-7-2. OptiChill Thawing & Express Chill Control
1. When you press the SELECT button on the right, the THAW LED will light. The time for the selected function will be
shown. You can cycle through the options in this order: EXPRESS CHILL/THAW OFF
EXPRESS CHILL (90 Min.)
THAW 0.5 lbs. (4 hours)
THAW 1.5 lbs. (8 hours)
THAW 3.5 lbs. (12 hours)
EXPRESS CHILL/THAW OFF.
If EXPRESS CHILL/THAW is selected, the NOTCH temperature in the Optichill will not be displayed.
2. If EXPRESS Chill is selected, the Optichill damper is opened and the fan motor is turned on. If the Optichill does not
reach the set temperature after no more than ninety minutes, the setting is released.
3. The Optichill will count down from 90 minutes and show the remaining time in minutes.
4. When the EXPRESS CHILL cycle ends (or is released), the setting defaults to FRUIT VEGE (39
°
F).
5. If THAW is selected, the Optichill damper is closed and the time and temperature will be set according to the thawing
function selected. The thawing function will be automatically terminated at the end of the set time.
6. When in THAW mode, the sensor controls the heater to keep the set temperature.
7. When in THAW mode, the display counts down the remaining time in minutes.
8. When the THAW mode is released, the Optichill automatically defaults to CHILLED ROOM (30
°
F).
u
LRSC26930**
2-7-3. OptiChill Temperature Control
1. The Optichill is in the bottom of the refrigerator compartment and allows the user to select and adjust the temperature
based on the type food stored there. Selections include meat, fish, fruits and vegetables, etc. Storing foods at the proper
temperature allows them to be stored for longer periods.
2. The Optichill consists of a temperature sensor, a damper between the Optichill and the freezer, and a temperature
control/display at the top.
3. At initial power-up, the Optichill defaults to FRUIT VEGE. If the refrigerator door is opened, the Optichill LED will be on.
4. When you press the SELECT button on the left, the LED will light and indicate the setting. The time for the selected
function will be shown. You can cycle through the options in this order: FRUIT VEGE (39
°
F)
CHILLED ROOM
PARTIAL
FREEZING
FRUIT VEGE. The display will indicate the temperature for the selected setting.
5. The Optichill sensor detects the temperature and relays that information to the MICOM. When the set temperature is
reached, the Optichill damper is closed. If the temperature rises, the damper is opened to allow the temperature to fall
again.
6. If the Optichill damper hasn
t moved within an hour, it is automatically moved and returned to its original setting once
every hour to keep it from freezing in one position.
MICOM FUNCTION
- 24 -