LG LRSC26980TT Service Manual - Page 79
Icing
View all LG LRSC26980TT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
TROUBLE DIAGNOSIS - 79 - 16. Icing Problems Causes Checks Measures Remarks Icing in the 1) Bad circulation of cool air. - Check the food is stored properly refrigerator - Clogged intake port in the (check discharge and intake port compartment. refrigerator compartment. are clogged). - Damper icing. - Sealing is not good. - Check icing on the surface of - Pipe icing. - Too much food is stored and clogs baffle and cool air path (pipe) after - Discharging the discharge port. dissembling the container box. pipe icing. - Bad defrosting. - Check icing at intake ports of freezer and refrigerator compartment. - Be acquainted with how to use. - Sealing on connecting parts. - Check the damper and replace it if it has defects. - Check defrost. (After forced defrosting, check ice in the evaporator and pipes.) - Check the defrost related parts if problem is caused by faulty defrosting. 2) Faulty door or refrigerator compartment. - Faulty gasket. - Faulty assembly. - Check gasket attached conditions. - Check door assembly conditions. - Correct the gasket attachment conditions and replace it. - Door assembly and replacement. - Replacement should be done when it cannot be repaired. 3) Overcooling in the refrigerator compartment. - Faulty damper in the refrigerator compartment. - Faulty MICOM (faulty sensor) - Check refrigerator compartment is overcooled (when button pressed on weak). - Check parts are faulty. - Replace faulty parts. 4) Bad defrosting - Heater wire is cut. - Defective defrost sensor. - Defrosing cycle. - Check frost on the evaporator after dissembling shroud and fan grille. - Check ice on intake port of freezer and refrigerator compartment. - Check parts related to defrosting. - Moisture does not freeze - Check defrosting. (Check ice on the on the evaporator but evaporator and pipe.) can be sucked into the refrigerator, where it condenses and freezes. This interferes with cold air circulation and sublimation of the ice. 5) Customers are not familiar with this machine. - Door opens. - High temperature, high moisture, and high load. - Check food interferes with door closing. - Check ice on the ceilings. - Be acquainted with how to use.