Lacie 301431U User Manual - Page 16
Turning the Drive
UPC - 093053761264
View all Lacie 301431U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
LaCie 2big Network User Manual 2.1. Turning the Drive On The power supply kit is composed of two cables: one cable (A) connects to the LaCie drive; and the other cable (B) connects to a power outlet, such as a wall outlet or a surge protector. Setup page 15 safe 100 big off auto on B C Fig. 2.1 1. Connect Cable A to your LaCie Drive. 2. Connect Cable B to the power supply brick (C). 3. Connect Cable B to a surge protector or wall outlet. 4. Turn on the drive by moving the power switch on the back of the drive to the "On" position (D). CAUTION: Only use the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty. Technical note: You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty.