Lacie 301431U User Manual - Page 54
big Network RAID Modes
UPC - 093053761264
View all Lacie 301431U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
LaCie 2big Network User Manual 5. RAID RAID page 53 5.1. 2big Network RAID Modes The LaCie 2big Network supports two RAID modes, Big (Concatenation) and Safe 100 (RAID 1). This section will help you decide which mode is right for your application. Technical note: Capacity varies depending upon RAID mode. ❖ Big = total accessible capacity ❖ Safe 100 (RAID 1) = 50% capacity ■ Big (Concatenation) In Big mode, the two physical disks are combined (concatenation) so that one single yet larger logical volume mounts on the desktop, offering maximum possible capacity (the available capacities of each disk are cumulated). If one physical disk fails, the data of both disks become inaccessible. ■ Safe 100 (RAID 1) In Safe 100 mode, the two physical disks are mirrored together (RAID 1) so that one single logical volume mounts on the desktop. All of the data (100%) are saved simultaneously on each disk (the available capacity cannot exceed the available capacity of the lowest-capacity single disk). If one physical disk fails, the data are available immediately on the second disk. When a drive is replaced after a drive failure, a rebuild begins automatically. All data are copied from the existing drive to the new drive. See section 5.3, Replacing Drives. disk 1 disk 2 disk 1 disk 2 disk 1 dis One Big volume One Safe volume disk 1 disk 2 disk 1 disk 2 disk 1 disk 2 disk 1 disk 2 disk 1 disk