Home » Lacie Manuals » External Hard Drives » Lacie 301431U » Manual Viewer

Lacie 301431U User Manual - Page 55

Changing the RAID Mode

UPC - 093053761264

Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

LaCie 2big Network User Manual 5.2. Changing the RAID Mode Changing the RAID mode involves two main steps, changing a physical setting and confirming the setting on the NAS administration page. caution: Changing the RAID mode destroys all data stored on the LaCie 2big. If you have saved data on the drives, back up data before following these steps. To change the RAID mode: 1. Insert a small, flat-blade screwdriver into the groove on the rotary switch and turn the screwdriver to the left or right to select a different mode (Fig. 5.2-A). 2. Sign in to the NAS administration page administrator account. 3. Click on System > Disk > RAID. 4. Select the "Apply modifications" box (A in Fig. 5.2B) and click the Apply button (B in Fig. 5.2-B). The 2big will create a new RAID array and erase all data from the disks. It may also reboot, in which case you will need to log in again to continue administration. safe 100 big off auto on Figure 5.2-A RAID page 54 A ■ RAID Status Indicators Home Page BIG Mode Blue Clean Red Array not active Gray Formatting B Figure 5.2-B SAFE Mode Active Clean, degraded Active, resyncing 2big is fully functional The disks are not recognized. Select System > Disk > RAID and check that disks are functional Intermediate state - 2big is formatting or rebuilding data

Section	Page
Health and Safety Precautions	5
General Use Precautions	5
1. Introduction to the LaCie 2big Network	7
I want to:	7
1.1. Box Content	8
1.2. Minimum System Requirements	9
1.3. Hard Drive Heat Management	10
1.4. Racking Options	11
1.5. Views Of The Drive	12
Front View/1-click Data Sharing	12
Rear View	13
1.6. Cables and Connectors	14
2. Setting Up Your LaCie 2big Network	15
2.1. Turning the Drive On	16
2.2. Connecting the Ethernet Cable	17
2.3. Connecting with LaCie Ethernet Agent (Windows)	18
2.4. Connecting with the IP Configurator Wizard (Mac)	20
2.5. Configuring the 2big Network on a LAN Without a DHCP Server	21
2.5.1. Configure with LaCie Ethernet Agent (Windows)	21
2.5.2. Configure with LaCie IP Configurator (Mac)	22
2.6. Disconnecting the 2big Network (Ethernet Connection)	23
3. Administering Your LaCie 2big Network	24
3.1. Accessing the NAS Administration Page	25
3.2. Setting the Display Language	26
3.3. Administration Home Page	26
3.4. Users	27
3.4.1. Administrator Account	27
3.4.2. Adding Users	28
3.4.3. Setting User Access to Shares	29
3.4.4. Setting Group Membership	29
3.4.5. About Access Privileges	30
3.4.6. Deleting User Accounts	30
3.4.7. Editing User Accounts	30
3.5. Groups	31
3.5.1. Adding Groups	31
3.5.2. Setting Group Access to Shares	32
3.5.3. Deleting Groups	33
3.5.4. Editing Groups	33
3.6. Shares	34
3.6.1. Creating Shares	34
3.6.2. Creating a Share from a USB Key	35
3.6.3. Deleting Shares	36
3.6.4. Editing Shares	36
3.7. System	37
3.7.1. Configuration	37
3.7.2. Network	38
3.7.2.1. Obtain IP from DHCP Server	38
3.7.2.2. Configure IP Manually	39
3.7.3. Disk	40
3.7.3.1. Formatting Disks	40
3.7.3.2. Adding additional storage space	40
3.7.4. Status	42
3.7.5. Maintenance	42
3.7.5.1. Saving and Loading System Configurations	43
3.7.5.2. Updating the System	44
3.7.5.3. Restart	44
3.7.5.4. Shut Down	44
3.7.6. System Log	45
4. Accessing the Shared Storage	46
4.1. Connect to a Share with Ethernet Agent (Windows)	46
4.2. Map a Drive with Ethernet Agent (Windows)	47
4.3. NAS Administration Page – Browse	48
4.3.1. Uploading Files	48
4.3.2. Downloading Files	49
4.3.3. Deleting Files	49
4.3.4. Logging Out	49
4.4. My Network Places – Windows Vista/XP/2000 Users	50
4.5. Mac Users	52
4.6. Linux Users	53
5. RAID	54
5.1. 2big Network RAID Modes	54
5.2. Changing the RAID Mode	55
5.3. Replacing Drives	56
5.3.1. Installing a New Drive	56
5.3.2. Initializing the New Drive	57
6. LED Indicators	58
7. Troubleshooting	59
8. Contacting Customer Support	62
8.1. LaCie Technical Support Contacts	63