Home » Lacie Manuals » External Hard Drives » Lacie 301431U » Manual Viewer

Lacie 301431U User Manual - Page 39

Important Info

UPC - 093053761264

Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

LaCie 2big Network User Manual 3.7.2.2. Configure IP Manually This method is used when the LaCie 2big Network is connected to a non-DHCP enabled network. In this case, you will need to manually assign the correct network settings for your LaCie 2big Network. Please check with your network administrator for more information about your network and which parameters you should use. For more information, see section 2.5, Configuring the 2big Network on a LAN Without a DHCP Server. important info: If the DHCP server's automatic IP address configuration function is selected/activated and there is no DHCP server on the network, the 2big Network will check first the DHCP, then the APIPA. If no address is found,an address ranging from 169.254.1.1 to 169.254.254.254 will be assigned. important info: The 2big Network supports frame (i.e. packets) sizes larger than 1500 bytes on the Gigabit Ethernet interface. JumboFrame capability extends supported frame size to 9000 bytes (9KB). In general, the higher the frame size, the better the network performance. Do not modify the JumboFrame size if your network is not configured for JumboFrame functionality. Check with your network administrator. Figure 3.7.2.2-A Figure 3.7.2.2-B Administration page 38

Section	Page
Health and Safety Precautions	5
General Use Precautions	5
1. Introduction to the LaCie 2big Network	7
I want to:	7
1.1. Box Content	8
1.2. Minimum System Requirements	9
1.3. Hard Drive Heat Management	10
1.4. Racking Options	11
1.5. Views Of The Drive	12
Front View/1-click Data Sharing	12
Rear View	13
1.6. Cables and Connectors	14
2. Setting Up Your LaCie 2big Network	15
2.1. Turning the Drive On	16
2.2. Connecting the Ethernet Cable	17
2.3. Connecting with LaCie Ethernet Agent (Windows)	18
2.4. Connecting with the IP Configurator Wizard (Mac)	20
2.5. Configuring the 2big Network on a LAN Without a DHCP Server	21
2.5.1. Configure with LaCie Ethernet Agent (Windows)	21
2.5.2. Configure with LaCie IP Configurator (Mac)	22
2.6. Disconnecting the 2big Network (Ethernet Connection)	23
3. Administering Your LaCie 2big Network	24
3.1. Accessing the NAS Administration Page	25
3.2. Setting the Display Language	26
3.3. Administration Home Page	26
3.4. Users	27
3.4.1. Administrator Account	27
3.4.2. Adding Users	28
3.4.3. Setting User Access to Shares	29
3.4.4. Setting Group Membership	29
3.4.5. About Access Privileges	30
3.4.6. Deleting User Accounts	30
3.4.7. Editing User Accounts	30
3.5. Groups	31
3.5.1. Adding Groups	31
3.5.2. Setting Group Access to Shares	32
3.5.3. Deleting Groups	33
3.5.4. Editing Groups	33
3.6. Shares	34
3.6.1. Creating Shares	34
3.6.2. Creating a Share from a USB Key	35
3.6.3. Deleting Shares	36
3.6.4. Editing Shares	36
3.7. System	37
3.7.1. Configuration	37
3.7.2. Network	38
3.7.2.1. Obtain IP from DHCP Server	38
3.7.2.2. Configure IP Manually	39
3.7.3. Disk	40
3.7.3.1. Formatting Disks	40
3.7.3.2. Adding additional storage space	40
3.7.4. Status	42
3.7.5. Maintenance	42
3.7.5.1. Saving and Loading System Configurations	43
3.7.5.2. Updating the System	44
3.7.5.3. Restart	44
3.7.5.4. Shut Down	44
3.7.6. System Log	45
4. Accessing the Shared Storage	46
4.1. Connect to a Share with Ethernet Agent (Windows)	46
4.2. Map a Drive with Ethernet Agent (Windows)	47
4.3. NAS Administration Page – Browse	48
4.3.1. Uploading Files	48
4.3.2. Downloading Files	49
4.3.3. Deleting Files	49
4.3.4. Logging Out	49
4.4. My Network Places – Windows Vista/XP/2000 Users	50
4.5. Mac Users	52
4.6. Linux Users	53
5. RAID	54
5.1. 2big Network RAID Modes	54
5.2. Changing the RAID Mode	55
5.3. Replacing Drives	56
5.3.1. Installing a New Drive	56
5.3.2. Initializing the New Drive	57
6. LED Indicators	58
7. Troubleshooting	59
8. Contacting Customer Support	62
8.1. LaCie Technical Support Contacts	63