Lacie 301431U User Manual - Page 57
LaCie 2big Network
UPC - 093053761264
View all Lacie 301431U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
LaCie 2big Network User Manual ■ 5.3.2. Initializing the New Drive When a new drive has been correctly installed into the 2big you will need to initialize the drive before the 2big can use it. To initialize a new drive: 1. Sign in to the NAS administration page administra- tor account. 2. Click on System > Disk > RAID. 3. Select the "Apply modifications" box and click the Apply button (Fig. 5.3.2). technical note: If the 2big is in SAFE mode, the new disk has to be synchronized with the original one. Depending on the capacity of the disk, synchronization may take a few hours. Figure 5.3.2 RAID page 56
LaCie 2big Network
User Manual
page µ¶
RAID
When a new drive has been correctly installed into
the 2big you will need to initialize the drive before the
2big can use it.
To initialize a new drive:
Sign in to the NAS administration page administra-
tor account.
Click on
System > Disk > RAID
.
Select the “Apply modifications” box and click the
Apply
button (Fig. 5.3.2).
TECHNICAL NOTE:
If the 2big is in SAFE mode, the
new disk has to be synchronized with the original one.
Depending on the capacity of the disk, synchronization
may take a few hours.
1.
2.
3.
5.3.2. Initializing the New Drive
■
Figure 5.3.2