Lenovo ThinkCentre M91p (English) User Guide - Page 75
Disconnect the system fan assembly cable from the system fan connector on the system board. See
View all Lenovo ThinkCentre M91p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
5. Disconnect the system fan assembly cable from the system fan connector on the system board. See "Locating parts on the system board" on page 12. 6. The system fan assembly is attached to the chassis by four rubber mounts. Remove the system fan assembly by cutting the rubber mounts and lifting the system fan assembly out of the chassis. Note: The new system fan assembly will have four new rubber mounts attached. Figure 45. Removing the system fan assembly 7. Install the new system fan assembly by aligning the new rubber mounts that came with the new system fan assembly with the corresponding holes in the chassis, and then push the rubber mounts through the holes. Then, carefully pull on the tips of the rubber mounts from the bottom until the new system fan assembly is secured in place. Figure 46. Installing the system fan assembly Chapter 5. Installing or replacing hardware 61