Lenovo ThinkPad 600X TP 600X User's Reference - Page 162
Lucent Win Modem, Dialing Properties
View all Lenovo ThinkPad 600X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Troubleshooting guide Problem Your modem application does not work with the ThinkPad modem. Your modem application does not work in the Windows 95 environment. Cause and action Make sure that the internal modem port is enabled, either by opening the "Device Manager" window and running the Modem Wizard, or by opening the ThinkPad Configuration program and doing as follows: 1. Click Start. 2. Move the cursor to Programs and ThinkPad; then click ThinkPad Configuration. 3. Click Internal Modem ( ). 4. Select Enable. 5. Click OK. If the modem does not work correctly, Online User's Guide. If the modem works correctly, set the following modem settings by doing the following: 1. Click Start. 2. Move the cursor to Settings and Control Panel. 3. Click Control Panel, and then double-click Modem. Lucent Win Modem is highlighted. 4. Click Properties, not Dialing Properties. 5. Click the Connection tab. 6. Clear the Wait for dial tone before dialing check box. 7. Click Advanced. 8. Clear the Use error control check box. 9. Select the Use flow control check box, and make sure that Hardware (RTS/CTS) is selected. 10. Click OK to close the window. 11. Click OK and return to the "Modem Properties" window. 12. Click Dialing Properties, fill in all boxes, and click either Tone dialing or Pulse dialing. Note: Most telephones today use tone dialing, where each button produces a different tone, instead of pulse dialing. 13. Click OK. 14. Click Close to close the window. 15. Close all active windows. Run your modem application again. Make sure that: The modem is connected correctly. The ! mark is to the left of the Lucent Win Modem in the "Device Manager" window. If the ! mark is there, there might be a system resource conflict with the other port. 140 IBM ThinkPad 600X User's Reference