Lenovo ThinkPad X23 English - ThinkPad X23 Service and Troubleshooting guide - Page 24
Errors without messages, Problem, Solution
View all Lenovo ThinkPad X23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Solving computer problems Message Solution EMM386 Not Installed - Edit C:\CONFIG.SYS and change a line from Unable to Set Page Frame Base Address. device=C:\WINDOWS\EMM386.EXE RAM to device=C:\WINDOWS\EMM386.EXE NOEMS CardBus Configuration Error -Device Disabled and save this file. Press F1 to go to the IBM BIOS Setup Utility. Press F9 and then Enter to load the default setting. Press F10 and then Enter to restart the system. Errors without messages Problem: When I turn on the machine, nothing appears on the screen and the machine does not beep while starting up. Note: If you are not sure whether you heard any beeps, turn off the computer; then turn it on again, and listen again. Solution: If a power-on password is set, press any key to display the power-on password prompt, and then type the correct password and press Enter. If the power-on password prompt does not appear, the brightness level might be set to minimum brightness. Adjust the brightness level by pressing the Fn+Home. If the screen still remains blank, make sure that: v The battery is installed correctly. v The ac adapter is connected to the computer and the power cord is plugged into a working electrical outlet. v The computer power is on. (Turn on the power switch again for confirmation.) If these items are properly set, and the screen remains blank, have the computer serviced. Problem: When I turn on the machine, nothing appears on the screen, but I hear two or more beeps or a continuous beep while starting up. Solution: If you are using Ethernet: v Make sure that the Ethernet cable is connected firmly. 14 ThinkPad® X Series Service and Troubleshooting Guide