LevelOne FCS-3071 Manual - Page 101
Tips to Enhance Live View Performance
View all LevelOne FCS-3071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Tips to Enhance Live View Performance Live view for multiple channels requires sufficient computing power to run the performance. In certain extreme cases, like when viewing several megapixel H.264 video streams at the same time, client computer will be overloaded and hence affect browser's performance. This is a common limitation imposed upon all Windows based video management programs and web browser. To enhance live view performance, below are several tips you may try: 1. Use dual stream mode for those devices supporting this function. Enable the dual stream mode and use the stream of lower resolution/frame rate/bit rate for live view, and megapixel resolution stream for recording. 2. Use another browser client to share these high-resolution channels. Given that there are 32 megapixel channels to be monitored, you may have Layout 1 to display channel 1~16, set Layout 2 to display channel 17~32, then open one browser client to show Layout 1 and the second browser on an extended monitor to show Layout 2. 3. Have NVR automatically lower the frame rate of live streams when system loading is high. Go to Setup page System tab Settings Display Performance Setting and enable this function. Basically, this setting will lower frame rate when the CPU usage is above certain percentage. You may also enable "Lower the frame rate when current layout is above_", in this way, when the layout is displaying over certain number of channels, the frame rate of all live streams will be declined. By default, this setting will be applied to the live display of all connected web clients and Workstation clients. A Workstation client computer can have its own specific display configuration without being affected by NVR universal setting. Log in as OneSecure Workstation client, go to Setup page System tab Workstation and configure the Display Performance 101