LevelOne FCS-3071 Manual - Page 56
Parity, Baud rate, Address ID
View all LevelOne FCS-3071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Parity Parity is the data validation mechanism for analog devices that use serial port interface to send or receive data. When choosing parity mode other than "none", the data packets will be validated for possible data losses so that failed command could be re-sent if necessary. Please refer to the parity setting of the analog device and choose exactly the same parity setting also in NVR. Available parity modes are: Parity mode name in NVR Serial data, represented by given amount of bits Parity mode (none, odd, even) Number of stop bits 8N1 8 N 1 8O1 8 O 1 8E1 8 E 1 8N2 8 N 2 8O2 8 O 2 8E2 8 E 2 7N2 7 N 2 7O2 7 O 2 7E2 7 E 2 Baud rate Address ID Baud rate defines the data speed through serial port interface - the rate value represents the number of symbols that can be transmitted within 1 second. Please refer to the baud rate setting of the analog device and choose exactly the same baud rate setting also in NVR. Available baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Address ID represents the identity of the device, only analog devices or speed dome cameras require this configuration. Please refer to the Address ID of the device and choose exactly the same baud rate setting also in OneSecure. Available value is from 1~99. Important Notice Note that the functions supported for devices connected using ONVIF are live streaming and adjustments to video image settings. How to Do Live PTZ Operation To configure PTZ settings, you need to view the live streaming while manipulating the PTZ controls simultaneously in this window. 56