LevelOne FCS-3071 Manual - Page 59
Set PTZ Preset Points - review
View all LevelOne FCS-3071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set PTZ Preset Points With PTZ devices, you may define a view by where to look (through panning and tilting) and how close (through zooming) to zoom. Once these views have been saved in NVR server as preset points, the device can always point to this view upon the event triggering or user's command. 1. Go to Setup page Devices tab, select the device from Device List, and click PTZ tab. 2. By PTZ operation, control the device to point at your desired view, and adjust the zoom level (if available). In PTZ Preset Point section, click a preset point name field to start editing the name, then click "+" to set this point. After finishing setting your desired preset points, click "Apply". You may review the points you set by clicking "" to go to the point, or "X" to delete it. You may modify an existing point with following procedure: 1. Select it 2. Define a new view 3. Click the "+" to set it 4. Click "Apply" to save it. 3. After the preset points are set, they are available on Live View page PTZ control panel. 59