LevelOne FCS-3071 Manual - Page 55

Con PTZ Device

Get LevelOne FCS-3071 PDF manuals and user guides View all LevelOne FCS-3071 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

OneSecure Video Management Software Amdinstrator Manual V3.0.09 Configure PTZ Device PTZ devices can do panning, tilting and zooming automatically or through manipulation. The PTZ-related applications are broadly supported by OneSecure. For example, you may control the movements of a PTZ camera with user interface panel controls or a joystick; the device can be programmed to execute a continuous tour or triggered by events to go to a preset position. Once an LevelOne PTZ device is added to the system, OneSecure will use the default settings of the device model and enable PTZ functions, so that you may immediately start PTZ operations. LEVELONE LEVELONE If you have previously changed the communication parameters of PTZ devices, please make sure these parameters on NVR side and device side match. To start matching up the parameters, please follow the procedures below: 1. If the device is a speed dome camera or an analog camera attached to video server, configure the parameters on physical device according to the product's installation instructions. 2. On the device's (camera or video server)web configurator, configure the parameters to match the setting on physical device, and test the PTZ operations to make sure the device is properly set to be connected 3. In OneSecure server, go to Setup page Devices tab, select the device from Device List, and click PTZ tab. In PTZ Protocol section, fill in the communication parameters. Adjustment Attributes Field Name Description Vendor is the provider of Protocol. The selectable vendors would vary Vendor depending on different device models. Available vendor types are: ACTI, DYNACOLOR, PELCO and SONY. Protocol is a set of rules to define the communication format between the device and controller. Different protocols are provided for selection according to Protocol the Vendor you choose. Available protocols following their vendors are: ACTI: [ACTI] / DYNACOLOR: [DYNACOLOR] / PELCO: [PELCOD] [PELCOP] SONY: [VISCA] 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
OneSecure Video Management Software Amdinstrator Manual V3.0.09
55
Configure PTZ Device
PTZ devices can do panning, tilting and zooming automatically or
through manipulation. The PTZ-related applications are broadly
supported by OneSecure. For example, you may control the
movements of a PTZ camera with user interface panel controls or a
joystick; the device can be programmed to execute a continuous tour or
triggered by events to go to a preset position.
Once an LevelOne PTZ
device is added to the system, OneSecure will use the default settings
of the device model and enable PTZ functions, so that you may
immediately start PTZ operations.
If you have previously changed the communication parameters of PTZ
devices, please make sure these parameters on NVR side and device side match.
To start matching up the parameters, please follow the procedures below:
1.
If the device is a speed dome camera or an analog camera attached to video server,
configure the parameters on physical device according
to the product’s installation
instructions.
2.
On the device’s (camera or video server)web configurator, configure the parameters to
match the setting on physical device, and test the PTZ operations to make sure the device
is properly set to be connected
3.
In OneSecure server, go to
Setup
page
Devices
tab, select the device from
Device List
,
and click
PTZ
tab. In
PTZ Protocol
section, fill in the communication parameters.
Adjustment Attributes
Field Name
Description
Vendor
Vendor is the provider of Protocol. The selectable vendors would vary
depending on different device models. Available vendor types are:
ACTI
,
DYNACOLOR
,
PELCO
and
SONY
.
Protocol
Protocol is a set of rules to define the communication format between the
device and controller. Different protocols are provided for selection according to
the Vendor you choose.
Available protocols following their vendors are:
ACTI: [ACTI
] /
DYNACOLOR
: [DYNACOLOR] /
PELCO
: [PELCOD] [PELCOP]
SONY
: [VISCA]
LEVELONE
LEVELONE