Lexmark C912 Service Manual - Page 157

5055-xxx Setting Printer Alignment 1. Press Menu until the color you want to adjust displays and then press Select. 2. Change the displayed value and press Select. You see a message displayed that the value is Saved. If you want to skip a selection press Select. X= sxxx* Y= sxxx* T= sxx* 3. Press Menu until Alignment Test Printing is displayed and press Select. Alignment Test Printing... 4. Look at the color and the value you have changed and see if this is acceptable. If so, go to the next adjustment. If it is not acceptable, go back to the color and adjust it again. 5. When all the values are acceptable for all colors, exit diagnostics. Note: If Return is pressed to exit the Alignment menu after a margin value has been incremented or decremented, then the default value is not changed. However, if the Alignment Test page is requested after a margin value has been incremented or decremented, then the default value is changed and then the Alignment Test page is printed using the new value. The alignment test page should be printed on letter of A4 paper only. To exit the alignment menu, press Return. Diagnostic aids 3-7