Lexmark C912 Service Manual - Page 91

5055-xxx Message Meaning Action Ready Hex The printer is in Hex Trace mode and is ready to receive and process print jobs. • Send a job to print. All data is printed in hexadecimal. Control strings are printed, not executed. • Turn the printer off and then on to exit Hex Trace mode. Remove Paper The specified output bin is full. Remove the paper from the specified bin(s). Resetting Maint Cnt Value The printer is resetting the counter that tracks wear on the fuser. Wait for the message to clear. Resetting the Printer The printer is resetting to the current default settings. Any active print jobs are canceled. Wait for the message to clear. Restore Held Jobs. Go/ Stop? The printer has been reset or has been turned on and the printer detects print and hold jobs stored on the hard disk. Press Go. All jobs on hard disk are restored. Press Return or Stop. No jobs are restored and the printer returns to Ready. Restoring Factory Defaults The printer is restoring factory default settings. Wait for the message to clear. Restoring Held The printer is restoring held Wait for the message to Jobs jobs from the hard disk. clear. Serial A serial interface is the active communication link. Wait for the message to clear. Std Bin Full The standard bin is full. Remove the paper in the bin to clear the message. Supplies One of the printer supplies requires attention. Press Menu to open the Supplies Menu and identify which supply item needs replacing. Diagnostic information 2-41