Lexmark C912 Service Manual - Page 97

5055-xxx Message Meaning Action 56 USB Port Disabled 56 Std USB Port Disabled Data has been sent to the printer through a disabled USB port. • Press Go to clear the message. • Make sure the USB Buffer menu item in the USB Menu is set to Disabled. 58 Too Many Bins Attached Too many output bins are installed. Unsupported output bins are installed. Turn off and unplug the printer. Remove or reconfigure the output bins. Plug the printer in and turn it on. 58 Too Many Disks Installed Too many disks are installed. Turn off and unplug the printer. Remove the excess hard disks. Plug the printer in and turn it on. 58 Too Many Flash Options Too many flash options are installed. Turn off and unplug the printer. Remove the excess flash options. Plug the printer in and turn it on. 58 Too Many Trays Attached Too many trays are installed. Turn off and unplug the printer. Remove the excess trays. Plug the printer in and turn it on. 61 Defective Disk The printer detects a defective hard disk. • Press Go to clear the message and continue printing. • Install a different hard disk before you perform any operations that require one. 62 Disk Full Insufficient memory on the hard disk. • Press Go to clear the message and continue printing. • Delete fonts, macros, and other data stored on the hard disk. Diagnostic information 2-47