Lexmark C912 Service Manual - Page 302

5055-xxx Transfer belt removal Note: If the transfer belt removal was attempted without using the Supplies Menu to lower the belt and the transfer belt is jammed or stuck, go to "Alternate method: Transfer belt was partially removed" on page 4-64. To replace the transfer belt before the Life Warning or Exhausted messages appear, open the Supplies Menu on the operator panel and select Replace Supplies, select Belt, and select Replace Now. If the 80 Transfer Belt Life Warning or Exhausted message appears, press Select when the Select = Replace message appears. The message Preparing for Maintenance appears, followed by Printer Ready for Maintenance, then Power Off to Replace Items. Note: If the operator panel is inoperable or if you have an unrecoverable error code, go to "Alternate method: Operator panel is inoperable or unrecoverable error code" on page 4-60. 1. Turn the printer off along with any optional devices connected to the printer. 2. Open the front cover and top unit. Warning: Do not touch, drop or place anything on the transfer belt. Touching the surface of the transfer belt or placing items on the belt may cause damage. 4-56 Service Manual