Lexmark C912 Service Manual - Page 38

5055-xxx Options and features Lexmark C91x printers support only Lexmark C91x paper-handling options. These options are not compatible with any other Lexmark printer. • 550-Sheet drawer-(includes 550-sheet tray and support unit) installs beneath the printer and holds approximately 550 sheets of 20 lb paper. Multiple optional drawers (up to 3) are supported simultaneously. • High-capacity feeder-is designed to provide an additional input tray (Tray 3 or Tray 5, depending on the configuration) with a total capacity of 3,000 sheets (plain paper-letter or A4-20 lb (75 g/m2). The high-capacity feeder is customer installable and attaches to the right side of the printer. • Heavy-media tray-is intended for special media such as transparencies, labels and glossy paper. This is supported only as Tray 1 (top drawer location). • Duplex unit-offers two-side printing and is designed to complement the Lexmark C91x printers. • Finisher-offers stapling, hole punching, offset stacking and an additional output bin. Two models are available. 3- or 4-hole leftedge hole punching is available. The single staple position is the upper left corner. The finisher can support up to 1,100 sheets of unstapled, unpunched media. For stapled media, the output bin supports up to 30 stapled sets or 1,000 sheets. The stapler can staple a maximum of 30 sheets per set. Each printer can support a single finisher. • Printer cabinet-is customer installable and attaches so the printer sits on top of the printer stand. The printer cabinet raises the printer to the correct height for use with the optional finisher and high-capacity feeder. The printer cabinet and high-capacity feeder can be installed at the same time. - C91x - 1 optional drawer - C91xn or dn - no optional drawers 1-22 Service Manual