Lexmark CS310 User's Guide - Page 145

Troubleshooting 145 Too many trays. Remove some. [58] 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet. 3 Remove the extra trays. 4 Connect the power cord to the electrical outlet. 5 Turn the printer back on. [Type] imaging kit low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to replace the imaging kit. If necessary, press continue printing. on the printer control panel to clear the message and [Type] imaging kit nearly low [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. If necessary, press on the printer control panel to clear the message and continue printing. [Type] imaging kit very low, [x] estimated pages remain [84.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. You may need to replace the imaging kit very soon. For more information, see the "Replacing supplies" section of the User's Guide. If necessary, press on the printer control panel to clear the message and continue printing. Waste toner bottle nearly full [82.xy] You may need to order a waste toner bottle. If necessary, press and continue printing. on the printer control panel to clear the message Weblink server not set up. Contact system administrator. From the printer control panel, press to clear the message. Note: If the message appears again, then contact your system support person.