Lexmark CS310 User's Guide - Page 92
Setting Hibernate Timeout, Using the printer control panel, Using the Embedded Web Server
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Saving money and the environment 92 Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > General Settings > 2 Press the arrow buttons until Press Sleep Button or Press and Hold Sleep Button appears, and then press . 3 Press the arrow buttons until Hibernate appears, and then press . Notes: • When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode. • When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode. Setting Hibernate Timeout Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Timeouts. 3 From the Hibernate Timeout menu, select the number of hours, days, weeks, or months you want for the printer to wait before it goes into a reduced power state. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > General Settings Timeouts Hibernate Timeout 2 Select the number of hours, days, weeks, or month you want the printer to wait before it enters Hibernate Timeout, and then press .