Lexmark CS310 User's Guide - Page 164
Print is too light, Step 5, Color, Adjust
View all Lexmark CS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Troubleshooting 164 Action Step 5 Check if the paper loaded in the tray has texture or rough finishes. Are you printing on textured or rough paper? Step 6 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Yes No From the printer control panel, set the paper texture in the Paper menu to match the paper loaded on the tray. Go to step 6. Go to step 7. The problem is solved. Is the print still too dark? Step 7 Replace the imaging kit, and then resend the print job. Contact customer support. The problem is solved. Is the print still too dark? Print is too light Action Step 1 a From the Quality menu on the printer control panel, select Color Adjust. b Resend the print job. Yes Go to step 2. Is the print still too light? Step 2 Go to step 3. a From the Quality menu on the printer control panel, increase the toner darkness. Note: 4 is the factory default setting. b Resend the print job. Is the print still too light? No The problem is solved. The problem is solved.